VIVOSingle 13 to 38 inch Ultrawide Monitor Arm Desk Mount, Regular Screens up to 32 inches, 22 lbs capacity, Fully Adjustable Stand with C-Clamp and Grommet Base, Black, STAND-V001

Great value for the money. I currently have a 32" Ultrawide on this and it's secure and doesn't shake or wobble. I have been using this for awhile now and its impressive at how well this works for the price and saved me so much desk space that this is a must have. Its easy to assemble and mount to the desk. Its a little harder to adjust the height but in no way impossible or a pain. Just be aware that if you have multiple monitors you will need to take your time for that perfect height. I am also using this exact same arm with a longer pole for the Ultrawide that is stacked above my main monitor to give you an idea how solid these are. I have a standy desk that has height adjustment and these don't move when moving the desks height. Great value for the money and would suggest these to anyone that is looking to save money and desk space. The only thing you need to be aware of is that you can adjust these left, right, forward and back very easy without doing anything but if you want to adjust the height you will need to get out an allen key and loosen the bolt to adjust these up and down. They also come with wire management routing pieces that go on the pole and the arms themselves so you can get a clean look. Great Price and holding strong.

Was looking to reduce clutter on my desk (Ikea Hilver desktop with beveled edges, this VIVO easily clamped on) as i began to rebuild a home music studio. This VIVO desk stand is fantastic. It's very sturdy and well built and easily supports my LG IPS 32" monitor with ease (Note: my monitor falls under the maximum weight for this arm, which is why I was confident it would work) Setup took a little longer than it needed to but that's not necessarily VIVO's fault (more on that below). As far as parts, everything is really straight forward and does not require many steps to have this up and running.A few things to consider - I set this up on an Ikea Hilver desktop which has beveled edges. Despite the Vivo sliding in deep enough that I could clam it, I decided to buy a set of nice solid wooden hexagonal coasters on amazon. I used 2 coaster on the top and one under the desk to clamp this on to. I did this because the Hilver is not solid wood, rather, it is bamboo with honeycomb filling and I was afraid that the weight of the monitor could eventually cause the desk to break and I didn't want this falling. So far, it is on there really tight and sturdily and I do not see it having any issues. The 4th coaster I use on the desk for drinks. The hexagonal pattern under the clamp looks nice and gives contrast to the bamboo color.My only gripe with the VIVO is that the holes on the VESA mount are a tad small. For whatever reason, LG decided to use a 200x100 VESA pattern rather than the more common 75x75 or 100x100 patterns. So, I bought a vesa adapter plate as an intermediary between the monitor and the VESA mount. The hardware I needed to pass through the VIVO Vesa Mount was slightly bigger than the hold on the mount - but i solved that with my drill and drill bit and simply made the holes bigger on the VIVO vesa plate. Took all of 5 minutes. But had I not needed to used a VESA adapter, the vivo mount would have mounted to the LG perfectly with zero modifications needed so I don't hold that against VIVO at all.all in all - i love this thing and i don't know why I waited so long to mount my monitor this way.

I've been living with this mount for about a week now. I used it to turn my secondary monitor in to a vertical display. My secondary monitor is not VESA compatible, so I had to do a little modification to the monitor, bit now that I have, the stand works great. The monitor I have mounted on it is an AOC i2367F. It's a pretty light monitor, but not ultra light. My biggest concern was that because the stand is not attached to the center of the back of the monitor, the monitor would rotate. That doesn't seem to be the case, and so even though the rotation plane is NOT adjustable, it has a high level of tension and holds up to a fair bit of torque.The stand came with a lot of cardboard packaging. The amazon box had some paper and a smaller brown box inside of it. Inside this smaller brown box was a white box, and inside that white box were two more white boxes, one containing the vertical part of the stand, one containing the horizontal part and all of the screws and small parts. Way too much packaging.I really like the cable management, I thought that would be a gimmicky feature, but it actually works well. The place where you mount the stand on the desk even serves as good place to stick the power brick for the monitor if it has one like mine (see photo).All but one of the axis (the tilt up and down one) are adjusted with a single allen wrench that is provided. The one that isn't, is adjusted with a different wrench, also provided. This axis is a pain to adjust, why couldn't they have just gone with the allen wrench on that one too? I don't know.The monitor's position does drift a little. Over the course of the day it will move 1-2 millimeters. Not a huge deal, you can just adjust it, but if you are obsessive about things being lined up like I am then you might have a problem, but overall this isn't such a big deal when you consider the convince that this thing affords you...This thing is convenient! it makes so much more space on my desk and eliminates the clutter of a stand. If you are working on something in the vertical window, just use the arm to bring it in front of the main screen and work like that. If your desk has a lot of depth like mine does, this thing is a must, because it allows you to bring the monitor closer to your eyes without having to have a traditional monitor stand sitting smack in the middle of the desk.I am really liking the adjustability of the monitor, and I am going to purchase another one of these stands when I upgrade my main monitor in the near future.Once you go adjustable stand you can't go back. They are the best. I would absolutely recommend to a friend.Photos:- the first photo is of my desk setup, the monitor currently using the stand is the vertical one on the right.- the second photo is of the back of the back of the monitor and the stand.- the third photo is a close up of where the stand attaches to the desk. there is a wide array of adjustment here and you could fit all thicknesses of desk. Also note that my monitors power brick is held conveniently right under the mount.UPDATE: 6/7/15: I have been using this for a little longer now and have decided that I like it enough to purchase a second one for my main monitor.UPDATE: 6/15/15: I'm as happy with the second stand as I am with the first.