Description
- HIGH EFFICIENCY: Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip, ST corporation production.Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors..
- Wide Drive Voltage, High Drive Current: The module can drive DC motors that have voltages between 5 and 35V, with a peak current up to 2A..
- HIGH RELIABILITY: Large capacity filter capacitance, afterflow protection diode, more stable and reliable..
- INTUITIVE: Control direction indicator, power indicator, current detection, logical part of the plate to take power interface..
- ATTENTION: This module can use built-in 78M05 for electric work via a driving power supply part. But to avoid the damage of the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage..
Double H driver module uses ST L298N dual full-bridge driver, an
integrated monolithic circuit in a 15- lead Multiwatt and
PowerSO20 packages. It is a high voltage,high current dual
full-bridge driver designed to accept standard TTL logic levels
and drive inductive loads such as relays, solenoids, DC and
stepping motors. Two enable inputs are provided to enable or
disable the device independently of the input signals.The
emitters of the lower transistors of each bridge are connected
together and the corresponding external terminal can be used for
the con-nection of an external sensing resistor. An additional
supply input is provided so that the logic works at a lower
voltage.
Technical Specifications:
Driver: L298N
Operating mode: H-bridge driver (dual)
Driver power supply: +5V/DC to +35V/DC
Drive current: 2A (MAX single bridge)
Logic power output Vss: +5/DC to 7V/DC (internal supply +5V/DC)
Logic current: 0 - 36mA
Controlling level: Low -0.3V/DC to 1.5V/DC, high: 2.3V/DC to Vss
Enable signal level: Low -0.3V/DC to 1.5V/DC, high: 2.3V/DC -
Vss
Max power: 25W
Working temperature: -25℃ to +130℃
Storage Temperature: -20 ℃ to ℃ to +135
Size: 43x43x27mm
Note:
This module has a built-in 5v power supply, when the driving
voltage is 7v-35v, this supply is suitable for power supply, DO
NOT input voltage to +5v supply interface.
When ENA enable IN1 IN2 control OUT1 OUT2
When ENB enable IN3 IN4 control OUT3 OUT4
Package includes:
1 x L298N Motor Drive Board Module
Reviews
Anmbest 5PCS L298N Dual H Bridge DC Stepper Motor Driver Controller Board Module for Arduino Smart Car UNO R3 Raspberry Pi Mega2560
Related Pages
Disclaimer: The price shown above includes all applicable taxes and fees. The information provided above is for reference purposes only. Products may go out of stock and delivery estimates may change at any time. desertcart does not validate any claims made in the product descriptions above. For additional information, please contact the manufacturer or desertcart customer service. While desertcart makes reasonable efforts to only show products available in your country, some items may be cancelled if they are prohibited for import in Togo. For more details, please visit our
Support Page.
Frequently Asked Questions About Anmbest 5PCS L298N Dual H Bridge DC Stepper Motor Driver Controller Board Module for Arduino Smart Car UNO R3 Raspberry Pi Mega2560 in Togo
Where can I buy Anmbest 5PCS L298N Dual H Bridge DC Stepper Motor Driver Controller Board Module for Arduino Smart Car UNO R3 Raspberry Pi Mega2560 online at the best price in the Togo?
desertcart is the best online shopping platform where you can buy Anmbest 5PCS L298N Dual H Bridge DC Stepper Motor Driver Controller Board Module for Arduino Smart Car UNO R3 Raspberry Pi Mega2560 from renowned brand(s). desertcart delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.
Is Anmbest 5PCS L298N Dual H Bridge DC Stepper Motor Driver Controller Board Module for Arduino Smart Car UNO R3 Raspberry Pi Mega2560 available and ready for delivery in Togo?
desertcart ships the Anmbest 5PCS L298N Dual H Bridge DC Stepper Motor Driver Controller Board Module for Arduino Smart Car UNO R3 Raspberry Pi Mega2560 to Lome, Sokode, Kpalime, Atakpame, Sansanne-Mangoand more cities in Togo. Get unlimited free shipping in 164+ countries with desertcart Plus membership. We can deliver the Anmbest 5PCS L298N Dual H Bridge DC Stepper Motor Driver Controller Board Module for Arduino Smart Car UNO R3 Raspberry Pi Mega2560 speedily without the hassle of shipping, customs or duties.
Does desertcart have 100% authentic Anmbest 5PCS L298N Dual H Bridge DC Stepper Motor Driver Controller Board Module for Arduino Smart Car UNO R3 Raspberry Pi Mega2560 online?
desertcart buys Anmbest 5PCS L298N Dual H Bridge DC Stepper Motor Driver Controller Board Module for Arduino Smart Car UNO R3 Raspberry Pi Mega2560 directly from the authorized agents and verifies the authenticity of all the products. We have a dedicated team who specialize in quality control and efficient delivery. We also provide a free 14 days return policy along with 24/7 customer support experience.
Is it safe to buy Anmbest 5PCS L298N Dual H Bridge DC Stepper Motor Driver Controller Board Module for Arduino Smart Car UNO R3 Raspberry Pi Mega2560 on desertcart?
Yes, it is absolutely safe to buy Anmbest 5PCS L298N Dual H Bridge DC Stepper Motor Driver Controller Board Module for Arduino Smart Car UNO R3 Raspberry Pi Mega2560 from desertcart, which is a 100% legitimate site operating in 164 countries. Since 2014, desertcart has been delivering a wide range of products to customers and fulfilling their desires. You will find several positive reviews by desertcart customers on portals like Trustpilot, etc. The website uses an HTTPS system to safeguard all customers and protect financial details and transactions done online. The company uses the latest upgraded technologies and software systems to ensure a fair and safe shopping experience for all customers. Your details are highly secure and guarded by the company using encryption and other latest softwares and technologies.